It is designed to dry solvent-washable as well as water-washable, polyester-backed, analogue and digital plates up to a size of 132 x 203 cm (52x80 inch) and thickness up to 7 mm (0.276 inches).
The standard version is equipped with a stress-accumulation early-warning-system and may be equipped with optional tools that enable remote-monitoring and remote-diagnostics.
It can be used to support an EVO 4-5 LF.
Dryer up to 132x203cm (52x80")
In addition to the innovative automatic units, Vianord also offers the standard dyer. This unit, for plates size up to 132 x 203 cm (52x80 inch), can be installed alone or combined with the Evo 4-5 LF on top.
- 60 Celsius degree hot air (140 degree Fahrenheit)
- 6 drawers with individual timers
- 3 heating sections with separate temperature control and air circulation (2 drawers each)
- Uniform temperature for excellent drying result
- Safety thermostat in every section
- Exhaust system integrated
- Safety device for exhaust control
- Touch screen operator display
- Programmable unit warm up
- Automatic switch off after last plate
The equipment is designed and manufactured according to the EEC safety and health standards, as specified in the Type Examination Certificate No. MA19-0042548-01 (309) issued by IMQ spa – Via Quintiliano 43 – 20138 Milan ITALY, and on the basis of the verifications carried out according to the essential requirements of the Directive 2006/42/EC, the system respects and is in compliance with all the applicable points.
This PLC controlled, stand-alone dryer unit is specifically designed for high quality digital and conventional photopolymer plates for flexible printing applications (e.g. wide web).
One of the most important feature of the Easy to Plate™ is the modularity concept, in other words, each unit is an independent piece of equipment buyable separately with the possibility of being upgraded and attached to one other to compose an all-in-one automatic unit. This gives you two choices: buy the whole automatic line at once, or amortize the investment and buy the different units over a longer time frame.
- Drawers Pre-Heating management
- Temperature management system
- Separate Heat management (one each 2 drawers)
- Dedicated exhaust system
Production Data Recording
System Dimensions (net)
180 x 247 x 98 cm
67.2 x 96.5 x 39.4 inch
System Weight (net)
Industrial Wooden Crates are favoured if the system must withstand multiple transhipments during transport and is mandatory when shipped outside the continent. Dimensions: 275 x 200 x 150 cm (108.26 x 78.74 x 59.05”)
The dimensions mentioned above are for reference only; packaging dimensions may vary depending on the packing company hired for the job.
The weights mentioned above are for reference only; packaging weight may vary depending on the packing company hired for the job.
Power Supply (field configurable)
360 / 440 Volt – 50 / 60 Hz - 3Ph / N / PE - 207 / 243 Volt – 50 / 60 Hz - 3Ph / PE
Current (nominal load)
8 A (360/440 Volt configuration) - 14 A (207/243 Volt configuration)
Power Rating (nominal)
5 x 4 mm2 (360/440 Volt configuration) - 4 x 6 mm2 (207/243 Volt configuration)
The unit is equipped with a well-designed exhaust system that collect and conveys vapours and fumes from the different sections the machine and discharge them as quickly and silently as possible. The blower in the systems has sufficient power to vent the entire equipment when the tube supplied is connected directly to a vent hoods in the external wall or on the roof.
Exhaust: Ø 80 mm (3.15”) Airflow: 100-120 m3/h
The system should be installed in a clean, constant-temperature and constant-humidity pre-printing environment with a temperature between 18 and 26°C (64.4 and 78.8°F) and a non-condensing relative humidity in the range of 40 to 60%.
To maintain such environmental standards an efficient heating/cooling and ventilating system may be required.
Vianord offers all equipment in standard powder coating Vianord Black.
In addition, Vianord offers numerous ways you can personalize your system. In fact, Vianord offers the best customization options in the industry! This allows you to showcase your brand and company’s spirit in ways other companies can’t offer. You can choose your personal colour and have your logo, company name, or slogan pop.